How Do I Reset My Honeywell Home Device? | Honeywell Home?

If a Honeywell thermostat is accidentally locked by an owner, guest, or personnel and the unlock code for the device is unknown, you can use the default unlock code which is "1234" .

How do I unlock my Honeywell thermostat if I forgot the code?

If a Honeywell thermostat is accidentally locked by an owner, guest, or personnel and the unlock code for the device is unknown, you can use the default unlock code which is "1234" .

How do I unregister my Honeywell thermostat from my previous owner?

if you have access to the account the thermostat was registered to, login to the app and then: Select the thermostat, Select the settings cog wheel icon in the top right corner. DELETE THERMOSTAT .

How to do a full factory reset on Honeywell?

PERFORMING A FACTORY RESET Press the Menu icon. Scroll down to “Advanced Setup” and select it. Select “Reset” Select “Factory Reset” May 10, 2024

Why is my Honeywell home not working?

If your Honeywell thermostat's screen is blank, check the batteries, breakers, and C wire (for smart thermostats), and make sure the furnace door is closed . You may need to override the program if you can't change the temperature.

What is the master code for Honeywell?

When you first install a Honeywell system, the master code is 1234 . Since the default master code is the same on every system, it's easy for an unauthorized individual to guess. To protect your home, you should change the code soon after installation.

Where is the reset button on a Honeywell safe?

1. Once the safe door is open, locate and press the small reset button located on the inside edge of the door , the keypad will beep twice and the green LED will light up. 2. Enter a new 3-8 digit Primary user code followed by the # key, the green LED will again light up and the keypad will beep.

How to reset home security system?

Prepping to Reset an Alarm System Disconnect the Power. Photo: Endrias Zewde / Adobe Stock. ... Wait a Few Minutes. At this point, the control panel or board's screen should be totally dark. ... Reconnect Power Supply. Now it's time to power the system back up. ... Run a Test. Photo: Image Source / DigitalVision / Getty Images. Oct 18, 2023

What is the default password for the Honeywell home system?

A: The default Honeywell Thermostat password is 1234 . It is important to make sure to change⁢ this password if you want to keep your thermostat secure.

How do I reset my Honeywell thermostat without the menu button?

Expert-Verified Answer. To reset a Honeywell thermostat without a reset button, turn off power, remove batteries, wait, reassemble, reconfigure settings, and test its functionality .

How do I bypass the program on my Honeywell thermostat?

Press up or down to immediately adjust the temperature . This will temporarily override the temperature setting for the current time period. “Temporary” will appear on the display and the current program period will flash. The new temperature will be used until the next period begins.

How do you override recovery mode on a Honeywell thermostat?

How To Override Recovery Mode. The easiest way to override recovery mode is to disable it via the thermostat settings . If you don't want to permanently disable recovery mode, just program it to run on certain days. Give it a day or so to allow the system to adapt to the setting.

How do I reset my thermostat after replacing the battery?

To reset a non-programmable digital thermostat, you'll need to take the face-off and hold the reset button for five seconds . You can also try removing the batteries for five seconds. Both of these methods should result in a reset thermostat.

How Do I Reset My Honeywell Home Device?

First, choose your thermostat from the menu below. Then follow the directions for the type of reset you need. Try a different reset if the one you tried does not fix the issue.

T9 (RCHT9510WF, RCHT9610WF)

PERFORMING A FACTORY RESET
1. Press the Menu icon
2. Scroll down to “Advanced Setup” and select it
3. Select “Reset”
4. Select “Factory Reset”
PERFORMING A WiFi RESET
1. Press the Menu icon
2. Scroll down to “WiFi” and select it
3. Select “Change Network”
4. Select the new WiFi network and enter the password
PERFORMING A SCHEDULE RESET
1. Press the Menu icon
2. Scroll down to “Advanced Setup” and select it
3. Select “Reset”
4. Select “Schedule Reset”
PERFORMING A HOMEKIT RESET
1. Press the Menu icon
2. Scroll down to “Advanced Setup” and select it
3. Select “Reset”
4. Select “HomeKit Reset”

T10 (THX321WF)

PERFORMING A FACTORY RESET
1. Press the Menu Icon
2. Scroll down to “Thermostat Information
3. Record the “Date Code”
4. Press the “back” arrow, then scroll down to “Installer Options”
5. Enter the Date Code when prompted to “Enter your password”
6. Select “Reset”
7. Select “Factory Reset”
PERFORMING A WiFi RESET
1. Press the Menu icon
2. Scroll down to “WiFi” and select it
3. Select “Change Network”
4. Select the new WiFi network and enter the password
PERFORMING A SCHEDULE RESET
1. Press the Menu Icon
2. Scroll down to “Thermostat Information
3. Record the “Date Code”
4. Press the “back” arrow, then scroll down to “Installer Options”
5. Enter the Date Code when prompted to “Enter your password”
6. Select “Reset”
7. Select “Schedule Reset”
PERFORMING A HOMEKIT RESET
1. Press the Menu Icon
2. Scroll down to “Thermostat Information
3. Record the “Date Code”
4. Press the “back” arrow, then scroll down to “Installer Options”
5. Enter the Date Code when prompted to “Enter your password”
6. Select “Reset”
7. Select “HomeKit”

T5+/T5/T6 (RCHT8610WF, RCHT8612WF, TH6320WF2, TH6220WF2)

PERFORMING A FACTORY RESET
1. Press and hold Menu
2. Press > until you see Reset, and then select it
3. Press > until you see Factory Reset, and then select it
4. Congratulations! You’ve reset your device! You can now configure your device for its new settings, either using the Resideo App, or on the thermostat screen itself.

PERFORMING A WiFi RESET
1. Press and hold Menu
2. Press > until you see Reset, and then select it
3. Press > until you see WiFi, and then select it
4. Congratulations! You’ve reset your device!
PERFORMING A SCHEDULE RESET
1. Press and hold Menu
2. Press [Symbol] until you see Reset, and then select it
3. Press [Symbol] until you see Schedule, and then select it
4. Congratulations! You’ve reset your device!
PERFORMING A HOMEKIT RESET
1. Press and hold Menu
2. Press > until you see Reset, and then select it
3. Press > until you see HomeKit Reset, and then select it
4. Congratulations! You’ve reset your device!

Smart/Lyric Round (TH8732WFH)

PERFORMING A FACTORY RESET
1. Press and hold the Cloud Icon
2. Press i until you see Reset, and then select it
3. Congratulations! You’ve reset your device! You can now configure your device for its new settings via the “+” icon, or “Add new device” button on your Resideo App. You can also configure your thermostat on the thermostat screen itself using the Installation Guide.
PERFORMING A WiFi RESET
1. Press and hold the Cloud Icon
2. Press i until you see WiFi, and then select it
3. Press i until you reach Setup, and then select it.
4. Congratulations! You’ve reset your device!
PERFORM A SCHEDULE RESET
1. Press Menu
2. Press Preferences
3. Press Restore Default Schedule
4. Congratulations! You’ve reset your device!
PERFORMING A HOMEKIT RESET
1. Press and hold the Cloud Icon
2. Press i until you see HomeKit Reset, and then select it
3. Congratulations! You’ve reset your device!

Smart WiFi 9000 (RTH9580WF, RTH9585WF, TH9320WF)

PERFORMING A FACTORY RESET
1. Press Menu, and then select Preferences
2. Press Restore Factory Defaults
3. Select Yes
4. Congratulations! You’ve reset your device!
PERFORMING A WiFi RESET
1. Press Menu
2. Press WiFi Setup
3. Congratulations! You’ve reset your device!
PERFORMING A SCHEDULE RESET
1. Press Menu
2. Press Preferences
3. Press Restore Default Schedule
4. Congratulations! You’ve reset your device!

FocusPro 6000 (TH6320WF1, RTH6580WF)

PERFORM FACTORY RESET
1. Press and hold and Fan
2. Change the number on the left to 90, and the number on the right to 1
3. Press Done
4. Congratulations! You’ve reset your device! You can now configure your device for its new settings on the thermostat screen.
PERFORM A WiFi RESET
1. Press and hold and Fan
2. Change the number on the left to 39, and the number on the right to 0
3. Press Done
4. Congratulations! You’ve reset your device!
PERFORM A SCHEDULE RESET
1. Press and hold and Fan
2. Change the number on the left to 85, and the number on the right to 1
3. Press Done
4. Congratulations! You’ve reset your device!

VisionPRO 8000 (TH8320WF, RTH8580WF)

PERFORM FACTORY RESET
1. Press System
2. Press and hold the blank box in the center
3. Change the number on the left to 0710, and the number on the right to 1
4. Press Done
5. Congratulations! You’ve reset your device! You can now configure your device for its new settings via the thermostat screen.
PERFORM A WiFi RESET
1. Press System
2. Press and hold the blank box in the center
3. Change the number on the left to 0900, and the number on the right to 0
4. Press Done
5. Congratulations! You’ve reset your device!
PERFORM A SCHEDULE RESET
1. Press System
2. Press and hold the blank box in the center
3. Change the number on the left to 0165, and the number on the right to 1
4. Press Done
5. Congratulations! You’ve reset your device!

VisionPRO TH8321WF

PERFORM FACTORY RESET
1. Press Menu
2. Go to Dealer Information
3. Scroll to the bottom and write down the date code
4. Press Done
5. Scroll down to Installer Options
6. Enter the date code.
7. Select Reset to Defaults.
8. Select Yes
9. Congratulations! You’ve reset your device! You can now configure your device for its new settings via the thermostat screen.
PERFORM A WiFi RESET
1. Press Menu
2. Press i until you see WiFi Setup
3. Select WiFi Setup
4. Congratulations! You’ve reset your device!
PERFORM A SCHEDULE RESET
1. Press Menu
2. Press i until you see Preferences, and then select it
3. Press i until you see Default Schedule, and then select it
4. Congratulations! You’ve reset your device!

Camera (C1, C2)

PERFORM FACTORY RESET
1. Press and hold the reset button for 45 seconds
2. Congratulations! You’ve reset your device! You can now configure your device for its new settings via the “+” icon, or “Add new device” button on your Resideo App.
PERFORM A WiFi RESET
1. Press and hold the reset button for 45 seconds
2. Congratulations! You’ve reset your device!

Water Leak Detector

PERFORM FACTORY RESET
1. Press and hold the reset button for 45 seconds
2. Congratulations! You’ve reset your device! You can now configure your device for its new settings via the “+” icon, or “Add new device” button on your Resideo App.
PERFORM A WiFi RESET
1. Press and hold the reset button for 45 seconds
2. Congratulations! You’ve reset your device!

Smart Home Security

PERFORM FACTORY RESET
1. Press and hold the action button for 30 seconds
2. When prompted, press the action button once again
3. Congratulations! You’ve reset your device! You can now configure your device for its new settings via the “+” icon, or “Add new device” button on your Resideo App.
PERFORM A WiFi RESET
1. Press and hold the action button for 30 seconds
2. When prompted, press the action button once again
3. Congratulations! You’ve reset your device!

Troubleshoot Additional Thermostat Issues
Check You Thermostat Wiring Capability

How Do I Reset My Honeywell Home Device? | Honeywell Home (2024)