NAK SF Viton Rubber Oils Seals: Oil seals are used in a variety of different applications in which a rotating shaft is lubricated by oil or grease. They are engineered to facilitate the smooth operation of your equipment, serving as a barrier to prevent the leakage of oils and greases while also keeping foreign substances from entering. SF type seals have a special design featuring an additional inner rubber lining for better protection of the inner case. They have a rubber-covered outside diameter with a single sealing lip on the inside diameter. The SF types feature a garter spring which allows some give to prevent a build-up of friction. (Seals under 5mm width may not always feature a spring.)
Benefits: High-temperature range, Chemical resistance, Higher wear resistance, Lower drag coefficient.
Brand / Quality: NAK - High Quality Click Here Click Here Click Here
Inside Diameter: 29mm
Outside Diameter: 45mm
Width: 8mm
Colour: Brown
Rubber Material: Viton
Need Nitrile Seals?
Replacement Rotarty Shaft Seal Springs?
Repair Shaft Sleeves?
Adhesives?
Click Here
Dimensions | ||
Shaft Size (not inside diameter) d | = | 29mm |
Outside Diameter (D) | = | 45mm |
Width (b) | = | 8mm |
Material | ||
Material | = | Viton Rubber |
Spring Material | = | Stainless Steel |
Colour | = | Brown |
Weights | ||
Weight | = | 0.01 kg |
Heat 1. Resistance to temperature extremes: Viton® withstands high temperature and simultaneously retains its good mechanical properties better than most other elastomers. Oil and chemical resistance also are relatively unaffected by elevated temperatures. Compounds of Viton® remain usefully elastic indefinitely when exposed to laboratory air oven aging up to 204 Degrees Celsius (400 Degrees Fahrenheit) or to intermittent test exposures up to 260 Degrees Celsius (500 Degrees Fahrenheit). High temperature service limits are generally considered to be: 3 hrs. at 232 Degrees Celsius (450 Degrees Fahrenheit) Cold Generally serviceable in dynamic applications down to -18 Degrees to -23 Degrees Celsius (0 Degrees to -10 Degrees Fahrenheit), although special formulations permit its use in static applications down to -54 Degrees Celsius (-65 Degrees Fahrenheit). Also, has proven to be satisfactory for static seals used under conditions approaching absolute zero. 2. Resistance to degradation by a greater variety of fluids and chemicals than any non-fluorinated elastomer, providing the best proven fluid resistance of any commercial rubber. Excellent resistance to oils, fuels, lubricants, and most mineral acids. 3. Extremely low permeability to a broad range of substances, including particularly good performance in oxygenated automotive fuels. 4. Resistance to many aliphatic and aromatic hydrocarbon fluids that act as solvents for other rubbers. 5. Exceptionally good resistance to compression set, even at temperatures which can embrittle other non-fluorinated elastomers. 6. Exceptionally good resistance to atmospheric oxidation, sun, and weather. Excellent resistance to fungus and mold. 7. Good electrical properties in low voltage, low frequency applications. 8. Low burning characteristics; inherently more resistant to burning than other non-fluorinated hydrocarbon rubbers.
1 hr. at 260 Degrees Celsius (500 Degrees Fahrenheit)
240 hrs. at 288 Degrees Celsius (550 Degrees Fahrenheit)
48 hrs. at 316 Degrees Celsius (600 Degrees Fahrenheit)
Oil Seal Number | = | 29x45x8_SFSS_VI |
29 | = | 29mm Inside Diameter |
45 | = | 45mm Outside Diameter |
8 | = | 8mm Width |
SF | = | Single Lip, Rubber Covered Metal Casing Seal and Additional Inner Rubber Lining with Spring |
SS | = | Stainless Steel Spring |
VI | = | Viton Rubber |
NAK Sealing Technologies Corporation is a professional manufacturer specializing in sealing design and production, serving numerous OEM clients from Germany, United States, Japan, and other regions. The product line of NAK encompasses a wide range of seals including, rotary shaft seals, piston seals, hydraulic seals, rod seals, wiper seals, Rings and other seals,catering to diverse applications and needs.
NAK's single packaging oil seal design ensures outstanding performance even after prolonged storage, maintaining stable quality even under extreme conditions such as high temperature, humidity, and pollution. We prioritize product usability with a packaging design that allows for immediate use without the need for additional cleaning.
In order to safeguard customer interests, unique QR codes are integrated into our product packaging, enabling easy authentication. This innovative technology not only provides security assurance for our products but also underscores our commitment to customer trust and satisfaction.
- Over 48 years of experience in sealing technology
- Supplying high quality seals to numerous OEM companies around the world
- Offering an extensive range of oil sealing solutions
- Unique single packaging that offers four protections
- Fully traceable and identifiable via QR code
Write a review
There are currently no reviews - but you could help other users and write one.
Write a Product Review
NAK 29x45x8mm Viton Rubber Additional Lining Single Lip Rotary Shaft Oil Seal with Stainless Spring SF